SAFECOAT® CAULKING COMPOUND

Designed to replace oil caulk and putty for windows, cracks, tub and shower enclosures and general maintenance.
by AFM Safecoat
$107.79

AFM Caulking Compound is a not-toxic, elastic emulsion type caulking compound designed to replace oil caulk and putty for windows, cracks and general maintenance work. It will not dry out or crack and does not release any solvents or obnoxious odors. Safecoat Caulking Compound provides a water resistant, flexible, easy to install, non sag sealant with excellent initial and permanent adhesion.

As a ready to use elastomer, AFM Caulking Compound can be applied to a variety of substrates and has high durability. Resin rich formula affords maximum bond strength.

USE ON:

This not-toxic, indoor/outdoor flexible emulsion type of caulking compound is designed to replace oil caulk and putty for windows, cracks, tub and shower enclosures and general maintenance. It will not dry out or crack and does not release any solvents or harsh odors. Provides a waterproof, easy to install sealant with excellent initial and permanent adhesion.

LIMITATIONS:

Safecoat products are made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use when indoor temperature is below 55 degrees F. Do not freeze. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.

SURFACE PREPARATION:

Prime and seal surfaces completely before application of caulk to protect against undue absorption into substrate. All surfaces to receive caulk and overlays must be sound, intact and cleaned of any grease, oils, dust, dirt, wax, unsound prior caulk and other foreign materials.

APPLICATION:

Apply Safecoat Multi-Purpose Caulk directly from tube or container with no dilution. Install firmly into opening and joints pressing to insure contact with faces. Tool with knife or spatula to smooth and level the sealant surface using rubbing alcohol.

CLEAN-UP:

Clean tools and equipment while they are still wet with rubbing alcohol.

DRYING/CURING TIME:

Under normal conditions, 24 hours for full cure. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F.