SAFECOAT® 3 IN 1 ADHESIVE
AFM Safecoat 3 in 1 Adhesive is a multi-purpose low odor, not toxic, formaldehyde free, waterbased mastic adhesive designed for adhering floor tiles made of ceramic, vinyl, parquet, and slate; for lightweight wall tiles, and for any carpet application where a typical carpet adhesive would be used.
If using 3 in 1 Adhesive over a concrete or wood substrate for the application of sheet flooring materials, it is recommended that one coat of AFM Safe Seal be used as a primer.
USE ON:
AFM Safecoat 3 in 1 is recommended for adhering floor tiles made of ceramic, vinyl, parquet, formica and slate; for lightweight wall tiles; and for any carpet application where a typical carpet adhesive would be used.
ADVANTAGES:
-
- Low odor, non-offensive to installer and occupant.
- Safely used by and for the chemically sensitive.
- Very low VOC content, meets or exceeds all federal and state air quality regulations, including California.
- Contains no formaldehyde.
COVERAGE:
AFM Safecoat 3 in 1 Adhesive will cover 50-60 square feet per gallon with 1/8” notched trowel. 100-120 square feet per gallon with 1/16” notched trowel.
CLEAN UP:
Clean tools and equipment while they are still wet with a solution of SafeChoice Super Clean and warm water.
