ECOS Paints - Stone and Tile Sealer

excellent, zero-VOC products for your interior and exterior projects
by Ecos Paints
$9.95

ECOS Paints - Stone and Tile Sealer is for use on plain and rough stone and unglazed tiles including terracotta, slate, limestone marble, sandstone, reconstituted stones and tiles and also the cement/ grout used in between. Not ideally suited to polished granite or similar.

  • Zero VOC
  • No Odor
  • Premium Quality
  • Extremely Durable
  • No Glycol
  • Zero VOC pigments

Country of Manufacture: US

Sizes/Dimensions

Comes in 2oz, or Gallon Sizes

Technical Data

HPD Third-Party Verified
8260B VOCs (Liquid State GC/MS)

Safety Information: Safety Data Sheet

Application/Coverage

Coverage 300 sq. ft. per gallon
Recommended coats 2
Description Stone & Tile Sealer is a protective sealer for use on most floors and worktop counters made from stone, tile, marble, and other hard materials. Use on plain and rough stone and unglazed tiles including terracotta, slate, limestone, marble, sandstone, reconstituted stones and tiles. Can also be used on joint cement and grout. Polished granite or similar, birdbaths, bathtubs, showers and surfaces which are subject to pooling water.
Preparation Ensure the surface is sound, dry, non-dusty, non-greasy. If in doubt as to the suitability of this product, test on scrap/spare piece is recommended.
Application and Clean Up Shake or stir before use. Apply one thin coat by spray, brush, roller, squeegee or sponge - depending on the porosity of the substrate. Do not allow pooling of the product. Remove any surface residual liquid straight away with a sponge or cloth. Dries in approximately 1 to 2 hours, depending on local ventilation. Clean equipment with water.

You recently viewed

Clear recently viewed

Recently Viewed