SAFECOAT® NATURALS OIL WAX FINISH

Works well on all ready-to-finish wood, bamboo and cork floors, and other interior wooden surfaces, including children’s furniture and toys.
by AFM
$110.00

AFM Naturals Oil Wax Finish is an organic plant-based premium hardener and sealer for unfinished woods. It is an ideal choice for all ready to finish wood, bamboo and other interior wooden surfaces including children’s furniture and toys. It contains a sophisticated combination of natural resins and waxes that together create a durable, water repellent, water-mark resistant finish and sealer, enhancing and maintaining wood beauty and breathability. It contains a sophisticated combination of natural resins and waxes that together create a durable, water-repellant, watermark resistant finish and sealer, enhancing and maintaining wood beauty and breathability. Based on natural vegetable oils, waxes and plant extractives, this product is free of lead, cobalt and citrus drying compounds.

USE:

AFM Naturals Oil Wax Finish can be used on most unsealed wood, new or weathered. Surfaces must be cleaned of any grease, oils, dust, dirt, wax, prior coatings, adhesives and other foreign materials. Surface must be completely dry and stable before application. Moisture content of the wood must be below 12%.

COVERAGE:

Coverage will vary depending upon the type, age, and porosity of the wood and on the number of coats applied. Test patches will provide a good indication of likely coverage. In general-

      • When applied in wet-on-wet coats to weathered wood- one gallon will cover from 125 square feet to 250 square feet.
      • On new, relatively non-porous wood from 250 – 450+ square feet per gallon.

CLEANUP:

Clean tools and equipment while they are still wet with AFM Naturals Diluent/Reducer or grain alcohol. Have good ventilation during clean-up*.

*WARNING:

Spontaneous combustion danger! AFM Naturals Oil Wax contains vegetable oils. By itself, it is not flammable or subject to spontaneous combustion. However, rags, steel wool, sanding dust or waste soaked with oil may spontaneously catch fire if improperly discarded or stored. Immediately after each use, place rags, steel wool, paper, cardboard, sanding dust and other soaked waste in a sealed, water filled metal container to prevent heat build-up and fire. When drying, allow oil soaked materials to spread out in open air to prevent fire.

You recently viewed

Clear recently viewed

Recently Viewed