Forbo/Marmoleum Residential Floor Finish
A one-step formula that cleans, shines, and protects in one time and labor saving step. You may use this product to help protect your Marmoleum product, ease cleaning, and add a light gloss. Use full-strength Marmoleum Floor Cleaner (see related items below) to strip the old finish before applying a new finish.
Coverage: about 2,000 square feet per gallon or 500 square feet per quart.
DIRECTIONS: Sweep up all loose dirt and dust. Use Forbo’s Neutral pH Cleaner to clean the floor, following the label directions. The floor should be rinsed with clean cool water and allowed to dry thoroughly. Working in small areas, apply a small amount of finish onto the floor. Spread a thin coat evenly with a damp clean mop, damp sponge, or damp applicator across the floor. Repeat the process until the entire area has been covered. Allow 10-15 minutes for the floor to dry. Repeat this process until desired gloss level is reached. To remove the finish, sweep up all loose dirt and dust. Dilute 1 part of Forbo Neutral pH Cleaner with 4 parts of warm water. Use a sponge mop and spread the solution liberally over a 3’ x 3’ area. Be careful not to flood the floor. Scrub the floor with a nylon pad. CAUTION: The floor can be slippery when wet! Pick up excess solution with a clean mop or cloth. The floor should be rinsed with clean cool water and allowed to dry thoroughly. Move to the next area of the floor and repeat the process.
Marmoleum Finish MSDS - click to see the Manufacturer Safety Data Sheet for the Marmoleum Floor Finish.
Country of Manufacture: NL