Pure Tung Oil
Please allow 1-2 weeks for delivery
Pure Tung Oil comes from cold pressing of the seeds or nuts of the Tung tree.Tung trees mainly grow in the mountainous regions of china away from industrialization and pollution.Climate, soil and air quality are essential for a high quality oil.Our 100% Pure Chinese Tung Oil or China wood oil is a all natural finish manufactured by pressing the tung nut, no petroleum distillates or other additives - just Pure Tung Oil.All Pure Tung Oils are not the same.Some low priced marketers will package South American Tung Oil (dark, greenish in color) and sell its as the higher quality Chinese Tung Oils.Chinese Pure Tung Oil is available in 3 grades, we only offer the best available, Grade 1 yellow.A better quality Pure Chinese Tung Oil will offer superior color, faster drying and a long term elastic finish.Elasticity is a important factor as the oil must continue to flex with the expansion and contraction of the substrate on which it is applied.
Pure Tung Oil is ASTM Quality Tested to be light in color with the highest amount of reactive sites to insure drying.
How Fresh is our Pure Tung Oil? All of our Pure Tung Oils are "fresh" pumped from a drum just before shipping.
For new wood floors and refinishing wood floors, applications of Pure Tung Oil must be thinned.See "" _blank="">Floor Finishing and Pure Tung Oil", "How to Stain Floors" https://dwellsmart-store.myshopify.com/admin/pages/16861757497 "How to Finish Decks and Porches".
Always test your application method before full application to a large project.
Country of Manufacture:
Country of Manufacture:China
Colors/OptionsThe color of wood finished with Pure Tung Oil will vary based on the wood species. A Dark Tung Oil is also available (see related items below). Please seeThis chart comparing Pure and Dark Tung Oil for a picture of different woods before and after finishing with Pure or Dark Tung Oil.
Technical DataPure Tung Oil is approved for food contact by the FDA..
REFERENCE: Gunstock Finishing and Care by Donald Newell, Bailey's Industrial Oil and Fat Products - Vol.1 - 4th edition.
Keep containers tightly closed away from extreme temperature changes and open flames.As with all oils, rags, steel wool or waste soaked with oil, may spontaneously catch fire if improperly discarded.Immediately after use, place the oil soaked material in a sealed water-filled metal container or hang outside separately to dry.
MSDS: View the Material Safety Data Sheet for this product.Suggested UsePure Tung Oil is recommended for wood finishing of kitchen tables, chopping blocks, wood and concrete counter tops, wood floors, concrete floors, refinishing wood floors, outdoor decks, outdoor furniture, wood siding, log homes both interior and exterior and similar uses. Its non-toxic nature makes it particularly appropriate for children's toys and furniture. It gives good protection to wood paneling and molding.
We have found tung oil to be a valuable helper in the workshop. It adheres very well to metal, and a light coat rubbed onto tool steel is an effective rust inhibitor.Wooden handles will also benefit from the occasional coat.he surface should be dusted to remove all loose particles.Alternatively, you can lightly sand the first coat before applying a second.Any filling, sealing or staining must be done before the oil is applied. The first coat should be a liberal one, and you can rub it over the wood with your hand, a soft rag.AllowThis application to sit for 20 minutes so the oil can soak in, then remove any excess with clean soft rags.Check after about half an hour for any seeping, and rubThis off as well.Let dry completely (24-48 hours) between coats.For woods with very open pores, allow an extra 24 hours drying time.
Tung oil can be applied pure or with Citrus Solvent added.Thinners such as Citrus Solvent can accelerate the drying process and greatly improve the penetration.Ingredients/CompositionA Pure Tung Oil all natural finish is water and alkali resistant offering a protective barrier.A Pure Tung Oil finish will not darken with age as other finishes will. It resists marring, penetrates well, remains elastic and unlikely to check.Tung oil builds quickly, consolidates the wood surface and builds a transparent matte finish.Pure Tung Oil finish will not mildew or bleed like linseed oil when dry which makes it an excellent candidate for outdoor finishes. It should be kept in an airtight container with minimum air space.Pure Tung Oil contains no thinners or driers and has a light nutty odor.A Pure Tung Oil finish mixed with Citrus Solvent is a all natural organic finish that is environmentally safe and food safe.Benefits and CertificationsTUNG OIL HISTORY: Pure Tung Oil (China wood oil) is an all-natural finishing product that provides a tough, flexible and highly water-resistant coating. It is classed as a drying oil along with linseed, poppy seed, safflower seed, walnut, soybean, oiticica and a few other oils.Although it is relatively new to the Western world, tung oil also known as chinawood oil has been known for centuries to the Chinese, and untilThis century, China was the main source for the oil. It comes from the seed of the tung trees, Aleurites fordii and Aleurites montana, deciduous trees that are very susceptible to frost damageThis vulnerability has restricted the cultivation of the tung trees to China and South America.Tung oil (china wood oil ) received wide application in China: in the building trades as a treatment for both stone and wooden structures; in marine trades as a preservative and water repellant on wooden boats. It is said to have been introduced to the West by Marco Polo.From the 13th to the 19th century, tung oil had only limited use in the West.More recently, tung oil has gained favor over linseed oil for wood finishing because it is faster drying and does not darken as much with age.Application/CoverageThe number of coats of oil to be applied will be determined by the intended use of the piece.Two to four coats are enough for decorative work, paneling and molding.Surfaces that receive moderate to heavy use or handling could need up to six coats for maximum protection, plus a light renewal coat a couple of times a year.Apply until the surface reaches the saturation pointThis will be evident as the surface will not absorb more oil. Renewal and building coats are quickly applied with cheese cloth, a lint free cloth or old nylon stockingsThis process will give you a surface that will stand up to vigorous use and spills: water will bead on the surface.