|
|
 |
|
 |
Sun-Mar Excel NE Composting Toilet |
|
 |
 |
 |
The Excel NE (non-electric) from Sun-Mar features a 3-chamber unit specifically designed for areas without a continuous power supply. First launched in 1981, the Excel NE has long been the standard toilet for those living off the grid. A 1998 redesign gave the unit a rounded look, and recessed the drum handle.
The Excel NE has no fan or heater. Odorless operation is achieved by a 4" vent mounted at the top rear of the unit which functions the same was as a chimney on a wood stove. For good air movement, the vent should be installed vertically with 2-3 feet clearance above the peak of the roof.
Use the optional 12 Volt Fan if you need to install the toilet with any bends in the vent. No more than two 45° bends are recommended, even if using the fan. If the Excel NE will be used heavily or will be located in a place subject to downdrafts, the optional 12 volt fan should be installed in the vent stack. The fan draws 1.4 watts and can be powered by a solar panel or a 12 volt marine battery.
Capacity
Listed capacities refer to the amount of people, on average, using
the unit per day. Do not pick a unit that is below your capacity.
|
| Residential/Continuous
(Adults/Families) |
2
adults or families of 3 |
| Seasonal/Vacation
(Adults/Families) |
5
adults or families of 7 |
|
|
Electricals
|
| Maximum
Amps (With Heater On) |
N/A |
| Fan
Watts (Required or Optional Hookup) |
1.4 (12 volt optional)
|
| Heater
Watts (When Thermostat switches it on) |
N/A |
| Average
Power Use in Watts (Heater on 1/2 time) |
N/A |
|
|
Vent
& Drains
|
| Vent
Pipe |
4"
PVC Thinwall |
| Drains
(Required or Optional Hookup) |
1"
Drain, Required
Use |
|
|
Weights
(Lbs.) & Dimensions
|
| Product
Weight/Shipping Weight |
50-95 |
| Shipping
Carton Dimensions (W by L by H) |
28"
by 35 1/2" by 36" |
| Depth
Required to Remove Drawer |
46" |
| Vent
outlet center distance from right side |
11 1/4" |
| Height
to center of vent |
N/A |
| Unit
Height/Width/Depth |
31 1/2"
by 32 1/2" by 33 1/2" |
|
See the Rough-In diagram for more detail on dimensions.
|
|
|
 |
|
 |
Related Items |
|
|
|
|
|
|
|
|
|