ECOS Paints - Wood Glue

ECOS Paints - Wood Glue

Was $89.95
$89.95
$9.95 – $89.95
  
  
 
ECOS Paints - Wood Glue is idea for interior woodwork, joinery, wooden floor tiles and laminates, floor boards, cork sheeting and tiles. Can also be used for paper, card, carpet fabric, etc. Can be used on unsealed chipboard, hardboard, cement-screed, and concrete substrates. Not suitable for teak or other oily woods or asphalt-sealed surfaces. 

  • Premium quality
  • Advanced resin technology for stronger bonding
  • Extremely durable
  • No odor
  • Zero VOC 
  • No glycol

Sizes/Dimensions

Comes in 2oz, Quart or Gallon Sizes

COLORS/OPTIONS

Ingredients/Composition

Technical Data

Safety Information

Photo Gallery

Installation

Application Coverage

Flooring: Best applied to the substrate with a notching tool - ideally approx 0.01" (0.3mm) at 0.39" (10mm) centers. Once spread, the adhesive should remain "wet" and workable for approximately 20 minutes but this does depend in part on the absorbency of the materials involved. If in doubt, a test area is advised. Only cover an area which can be finished within this timeframe. Press the floor covering firmly into place. Remove traces of wet adhesive with a damp cloth. Joinery: Use as normal, apply with a brush or knife/spatula. Preferably clamp until hard dry (min. 8 hrs). Remove excess with a damp cloth.

Application Notes

Estimate Coverage: 150 to 180 sq ft/ gallon

Suggested Use

Benefits and Certifications

Care and Maintenance

Shipping Information

  • Sustain

  • Protect

  • Conserve

  • Reduce

  • Share

Sizes/Dimensions

Comes in 2oz, Quart or Gallon Sizes

COLORS/OPTIONS

Ingredients/Composition

Technical Data/h3>

Safety Information

Photo Gallery

Installation

Application Coverage

Flooring: Best applied to the substrate with a notching tool - ideally approx 0.01" (0.3mm) at 0.39" (10mm) centers. Once spread, the adhesive should remain "wet" and workable for approximately 20 minutes but this does depend in part on the absorbency of the materials involved. If in doubt, a test area is advised. Only cover an area which can be finished within this timeframe. Press the floor covering firmly into place. Remove traces of wet adhesive with a damp cloth. Joinery: Use as normal, apply with a brush or knife/spatula. Preferably clamp until hard dry (min. 8 hrs). Remove excess with a damp cloth.

Application Notes

Estimate Coverage: 150 to 180 sq ft/ gallon

Suggested Use

Benefits and Certifications

Care and Maintenance

Shipping Information