ECOS Paints - Solid Concrete Stain

ECOS Paints - Solid Concrete Stain

Was $9.95
$9.95
$9.95 – $49.95
  
  
 
 ECOS Paints - Solid Concrete Stain is a tinted, medium sheen, solvent free water repellent, effective for use on concrete, masonry, brickwork and plaster. Concrete stain will shed water, mud and will protect against many stains. Recommended for application on walls, flooring, patios, walkways and concrete decking.

** Not recommended for garages. 
  • Zero VOC 
  • Easy to apply
  • Fast drying 
  • Safe for any area
  • No Glycol 
  • Zero VOC pigments 

Sizes/Dimensions

Comes in 2oz, Quart or Gallon Sizes

COLORS/OPTIONS

Ingredients/Composition

Technical Data

HPD Third Party Verified  
8260B VOCs (Liquid State GC/MS)

Safety Information

Photo Gallery

Installation

Application Coverage

Stir gently and thoroughly before use. Sweep area immediately prior to applying. Can be applied using a good quality synthetic brush; or rolled using a shed resistant 1/2”-3/4” roller cover; or applied using an airless spray 0.013” – 0.015” tip at 1800-2500 psi. “Cut-in” corners, or edges with a brush, then evenly apply with a roller over the remainder of the surface, working in one direction. Do not overwork the product. Maintain a wet edge to avoid lap marks. Two coats are recommended to achieve maximum performance and protection. Allow 4 to 6 hours for the product to dry before applying a second coat (if necessary) perpendicular to the first coat.

Application Notes

Typical Coverage: 170-430 sq ft. /gallon

Suggested Use

Benefits and Certifications

Care and Maintenance

Shipping Information

  • Sustain

  • Protect

  • Conserve

  • Reduce

  • Share

Sizes/Dimensions

Comes in 2oz, Quart or Gallon Sizes

COLORS/OPTIONS

Ingredients/Composition

Technical Data/h3>
HPD Third Party Verified  
8260B VOCs (Liquid State GC/MS)

Safety Information

Photo Gallery

Installation

Application Coverage

Stir gently and thoroughly before use. Sweep area immediately prior to applying. Can be applied using a good quality synthetic brush; or rolled using a shed resistant 1/2”-3/4” roller cover; or applied using an airless spray 0.013” – 0.015” tip at 1800-2500 psi. “Cut-in” corners, or edges with a brush, then evenly apply with a roller over the remainder of the surface, working in one direction. Do not overwork the product. Maintain a wet edge to avoid lap marks. Two coats are recommended to achieve maximum performance and protection. Allow 4 to 6 hours for the product to dry before applying a second coat (if necessary) perpendicular to the first coat.

Application Notes

Typical Coverage: 170-430 sq ft. /gallon

Suggested Use

Benefits and Certifications

Care and Maintenance

Shipping Information