ECOS Paints - Interior Radiator Paint

ECOS Paints - Interior Radiator Paint

Was $9.95
$9.95
$9.95 – $56.95
  
  
 
ECOS Paints - Interior Radiator Paint is a low sheen, protective finish that dries to a hard, durable film. Specifically designed for the temperature extremes and fluctuations of hot water radiators. Not suitable for steam, or electric storage radiators which run at even higher temperatures and require specialized finishes. 

Just like all ECOS Paints products, the Interior Radiator Paint is Zero VOC, simple to apply, contains no odor, and is HPD third party verified. It can be applied just like any traditional paint but is water based for easy clean up and can be applied in any space without discomfort.  

  • Zero VOC 
  • Easy to apply
  • Fast drying 
  • Safe for any area
  • No Glycol 
  • Zero VOC pigments 

Sizes/Dimensions

Comes in 2oz, Quart or Gallon Sizes

COLORS/OPTIONS

Ingredients/Composition

Technical Data

HPD Third Party Verified  
8260B VOCs (Liquid State GC/MS)

Safety Information

Photo Gallery

Installation

Application Coverage

Stir gently and thoroughly before use. Using only best quality soft paint brushes, work progressively along the radiator. Do not over-brush, layoff, or go back over painted areas. Paint only onto cold radiators - do not force-dry. Best results are normally achieved with two coats. Radiators can be put back into service only when the paint film is dry. Normally touch dry in 1-2 hours. Allow at least 8 hours between coats.

Application Notes

Typical Coverage: 380-430 sq ft. /gallon

Suggested Use

Benefits and Certifications

Care and Maintenance

Shipping Information

  • Sustain

  • Protect

  • Conserve

  • Reduce

  • Share

Sizes/Dimensions

Comes in 2oz, Quart or Gallon Sizes

COLORS/OPTIONS

Ingredients/Composition

Technical Data/h3>
HPD Third Party Verified  
8260B VOCs (Liquid State GC/MS)

Safety Information

Photo Gallery

Installation

Application Coverage

Stir gently and thoroughly before use. Using only best quality soft paint brushes, work progressively along the radiator. Do not over-brush, layoff, or go back over painted areas. Paint only onto cold radiators - do not force-dry. Best results are normally achieved with two coats. Radiators can be put back into service only when the paint film is dry. Normally touch dry in 1-2 hours. Allow at least 8 hours between coats.

Application Notes

Typical Coverage: 380-430 sq ft. /gallon

Suggested Use

Benefits and Certifications

Care and Maintenance

Shipping Information