Stir gently and thoroughly before use and occasionally during use.
On bare concrete, the first coat can be diluted by the addition of 10% water (stir thoroughly) to help adhesion.
Two coats normally needed.
Apply generously with a well loaded brush or a narrow (6" - 10") gloss or foam roller. Floorboards - work along the length of the boards, not across.
Use only best quality soft paint brushes/rollers.
Work progressively along, do not over-brush, do not lay off, do not go back over wet or drying painted areas.
Allow to dry at least over night (and preferably 24 hours) between coats.
More Information on Application here